Parallel Charging Board (Upto 6 Batteries)

 This device is to be used with a balance charger to simultaneously charge multiple lithium batteries in parallel. By this method you can significantly save time on battery charge process. 

 The method is said to be a safe and efficient way to charge LiPo batteries, and is being widely accepted by more and more RC hobbyists all over the world. 

 Parallel charging can save your time significantly. If you charge four batteries at the same time, the charge current is four times of that you used for a single pack, and you need only approximately 1/4 of the charge time to charge every battery separately. 

 Each board has six sets of balance ports, from 2S-6S and six XT60 Connectors. Since these ports and connectors are arranged in parallel, an XT60 and a balance port can be randomly matched for battery charge.  

 The PCB board is made of two ounce copper and the main power circuit is heavily tinned to allow the use of high current. The product have been fully tested under 30 A continuous current, and is safe to be load at 40 for a short time (10 – 30 minutes).